【重磅！】Linux下TCP优化脚本
作者：linux120 发布时间：March 14, 2014 分类：服务器配置
#!/bin/bash
host=$(hostname)
ARCH=$(uname -m)
which bc
if [ $? -ne 0 ]; then
echo "This script require GNU bc, cf. http://www.gnu.org/software/bc/"
echo "On Linux Debian/Ubuntu you can install it by doing : apt-get install bc"
fi
echo "Update sysctl for $host"
mem_bytes=$(awk '/MemTotal:/ { printf "%0.f",$2 * 1024}' /proc/meminfo)
shmmax=$(echo "$mem_bytes * 0.90" | bc | cut -f 1 -d '.')
shmall=$(expr $mem_bytes / $(getconf PAGE_SIZE))
max_orphan=$(echo "$mem_bytes * 0.10 / 65536" | bc | cut -f 1 -d '.')
file_max=$(echo "$mem_bytes / 4194304 * 256" | bc | cut -f 1 -d '.')
max_tw=$(($file_max*2))
min_free=$(echo "($mem_bytes / 1024) * 0.01" | bc | cut -f 1 -d '.')
if [ "$1" != "ssd" ]; then
vm_dirty_bg_ratio=5
vm_dirty_ratio=15
else
# This setup is generally ok for ssd and highmem servers
vm_dirty_bg_ratio=3
vm_dirty_ratio=5
fi
>/etc/sysctl.conf cat << EOF
# Disable syncookies (syncookies are not RFC compliant and can use too muche resources)
net.ipv4.tcp_syncookies = 0
# Basic TCP tuning
net.ipv4.tcp_keepalive_time = 600
net.ipv4.tcp_synack_retries = 3
net.ipv4.tcp_syn_retries = 3
# RFC1337
net.ipv4.tcp_rfc1337 = 1
# Defines the local port range that is used by TCP and UDP
# to choose the local port
net.ipv4.ip_local_port_range = 1024 65535
# Log packets with impossible addresses to kernel log
net.ipv4.conf.all.log_martians = 1
# Minimum interval between garbage collection passes This interval is
# in effect under high memory pressure on the pool
net.ipv4.inet_peer_gc_mintime = 5
# Disable Explicit Congestion Notification in TCP
net.ipv4.tcp_ecn = 0
# Enable window scaling as defined in RFC1323
net.ipv4.tcp_window_scaling = 1
# Enable timestamps (RFC1323)
net.ipv4.tcp_timestamps = 1
# Enable select acknowledgments
net.ipv4.tcp_sack = 1
# Enable FACK congestion avoidance and fast restransmission
net.ipv4.tcp_fack = 1
# Allows TCP to send "duplicate" SACKs
net.ipv4.tcp_dsack = 1
# Controls IP packet forwarding
net.ipv4.ip_forward = 0
# No controls source route verification (RFC1812)
net.ipv4.conf.default.rp_filter = 0
# Enable fast recycling TIME-WAIT sockets
net.ipv4.tcp_tw_recycle = 1
# TODO : change TCP_SYNQ_HSIZE in include/net/tcp.h
# to keep TCP_SYNQ_HSIZE*16<=tcp_max_syn_backlog
net.ipv4.tcp_max_syn_backlog = 20000
# tells the kernel how many TCP sockets that are not attached
# to any user file handle to maintain
net.ipv4.tcp_max_orphans = $max_orphan
# How may times to retry before killing TCP connection, closed by our side
net.ipv4.tcp_orphan_retries = 1
# how long to keep sockets in the state FIN-WAIT-2
# if we were the one closing the socket
net.ipv4.tcp_fin_timeout = 20
# maximum number of sockets in TIME-WAIT to be held simultaneously
net.ipv4.tcp_max_tw_buckets = $max_tw
# don't cache ssthresh from previous connection
net.ipv4.tcp_no_metrics_save = 1
net.ipv4.tcp_moderate_rcvbuf = 1
# increase Linux autotuning TCP buffer limits
net.ipv4.tcp_rmem = 4096 87380 16777216
net.ipv4.tcp_wmem = 4096 65536 16777216
# increase TCP max buffer size
net.core.rmem_max = 16777216
net.core.wmem_max = 16777216
net.core.netdev_max_backlog = 2500
net.core.somaxconn = 65000
vm.swappiness = 0
# You can monitor the kernel behavior with regard to the dirty
# pages by using grep -A 1 dirty /proc/vmstat
vm.dirty_background_ratio = $vm_dirty_bg_ratio
vm.dirty_ratio = $vm_dirty_ratio
# required free memory (set to 1% of physical ram)
vm.min_free_kbytes = $min_free
# system open file limit
fs.file-max = $file_max
# Core dump suidsafe
fs.suid_dumpable = 2
kernel.printk = 4 4 1 7
kernel.core_uses_pid = 1
kernel.sysrq = 0
kernel.msgmax = 65536
kernel.msgmnb = 65536
# Maximum shared segment size in bytes
kernel.shmmax = $shmmax
# Maximum number of shared memory segments in pages
kernel.shmall = $shmall
EOF
/sbin/sysctl -p /etc/sysctl.conf
exit $?